HPE FlexFabric 5950 Series

163
IPv6 address Routing interface Physical interface Type
N/A Tun1 Tun1 Tunnel
# Display the number of IPv6 adjacency entries for the specified slot.
<Sysname> display ipv6 adjacent-table slot 1 count
Total entries on slot 1: 1
Table 34 Command output
Field Description
IPv6 address
IPv6 address of the next hop.
• For a P2P link, the IPv6 address of the next hop is not needed. This
field has the value 0::0, and displays N/A.
• For an NBMA link, the value 0.0.0.0 indicates a default adjacency
table. Packets are forwarded through the default virtual circuit.
Routing interface Output interface of the matching route entry.
Physical interface Physical interface of which the outgoing packets are sent out.
Logical interface
Logical interface that sends the packets. If the entry has no logical
interface, this field displays
N/A
.
Service type/Type Link layer protocol type, such as PPP, HDLC, Tunnel, and MTunnel.
Action type Packet processing type,
Forwarding
or
Drop
.
Link media type
Link media type:
• P2P—Point-to-point link.
• NBMA—Non-broadcast multi-access link.
VPN index Index of the VPN.
Virtual circuit information
Information about the virtual circuit, such as PVC or DLCI. If the entry has
no virtual circuit, this field displays
N/A
.
Link head information(IPv6) Link layer header for IPv6.