169
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays IP packet statistics for all member devices.
Usage guidelines
IP statistics include information about received and sent packets, fragments, and reassembly.
Examples
# Display IP packet statistics.
<Sysname> display ip statistics
Input: sum 7120 local 112
bad protocol 0 bad format 0
bad checksum 0 bad options 0
Output: forwarding 0 local 27
dropped 0 no route 2
compress fails 0
Fragment:input 0 output 0
dropped 0
fragmented 0 couldn't fragment 0
Reassembling:sum 0 timeouts 0
Table 35 Command output
Field Description
Input
Statistics about received packets:
• sum—Total number of packets received.
• local—Total number of packets destined for the device.
• bad protocol—Total number of unknown protocol packets.
• bad format—Total number of packets with incorrect format.
• bad checksum—Total number of packets with incorrect checksum.
• bad options—Total number of packets with incorrect option.
Output
Statistics about sent packets:
• forwarding—Total number of packets forwarded.
• local—Total number of packets locally sent.
• dropped—Total number of packets discarded.
• no route—Total number of packets for which no route is available.
• compress fails—Total number of packets failed to be compressed.
Fragment
Statistics about fragments:
• input—Total number of fragments received.
• output—Total number of fragments sent.
• dropped—Total number of fragments dropped.
• fragmented—Total number of packets successfully fragmented.
• couldn't fragment—Total number of packets failed to be fragmented.
Reassembling Statistics about reassembly:
To Next Page
Loading...
