177
Type: 1
Protocol: 6
Connection info: src = 192.168.20.200:179 , dst = 192.168.20.14:4181
Inpcb flags: N/A
Inpcb extflag: N/A
Inpcb vflag: INP_IPV4
TTL: 255(minimum TTL: 0)
Connection state: ESTABLISHED
TCP options: TF_REQ_SCALE TF_REQ_TSTMP TF_SACK_PERMIT TF_NSR
NSR state: READY(M)
Send VRF: 0x0
Receive VRF: 0x0
Table 39 Command output
Field Description
TCP inpcb number Number of TCP IP PCBs.
tcpcb number
Number of TCP PCBs. This field is not displayed if the state of the
TCP connection is
TIME_WAIT
.
Creator
Name of the operation that created the socket. The number in
brackets is the process number of the creator.
State State of the socket.
Options Socket options.
Error Error code.
Receiving buffer
(cc/hiwat/lowat/state)
Displays receive buffer information in the following order:
• cc—Used space.
• hiwat—Maximum space.
• lowat—Minimum space.
• state—Buffer state:
{ CANTSENDMORE—Unable to send data to the peer.
{ CANTRCVMORE—Unable to receive data from the peer.
{ RCVATMARK—Receiving tag.
{ N/A—None of the above states.
Sending buffer
(cc/hiwat/lowat/state)
Displays send buffer information in the following order:
• cc—Used space.
• hiwat—Maximum space.
• lowat—Minimum space.
• state—Buffer state:
{ CANTSENDMORE—Unable to send data to the peer.
{ CANTRCVMORE—Unable to receive data from the peer.
{ RCVATMARK—Receiving tag.
{ N/A—None of the above states.
Type
Socket type:
• 1—SOCK_STREAM. This socket uses TCP to provide reliable
transmission of byte streams.
• 2—SOCK_DGRAM. This socket uses UDP to provide datagram
transmission.
• 3—SOCK_RAW. This socket allows an application to change
the next upper-layer protocol header.
• N/A—None of the above types.
To Next Page
Loading...
