EasyManuals Logo

HPE FlexFabric 5950 Series Command Reference

HPE FlexFabric 5950 Series
363 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #215 background imageLoading...
Page #215 background image
205
Field Description
InUnknownProtos Received IPv6 packets with unknown or unsupported protocol type.
InDelivers
Received IPv6 packets that are delivered to user protocols (such as
ICMPv6, TCP, and UDP).
OutRequests Local IPv6 packets sent by IPv6 user protocols.
OutForwDatagrams IPv6 packets forwarded by the interface.
InNoRoutes
Received IPv6 packets that are discarded because no matching route
can be found.
InTooBigErrors
Received IPv6 packets that fail to be forwarded because they exceeded
the Path MTU.
OutFragOKs Fragmented IPv6 packets on the output interface.
OutFragCreates Number of IPv6 fragments on the output interface.
InMcastPkts Received IPv6 multicast packets.
InMcastNotMembers
Received IPv6 multicast packets that are discarded because the
interface is not in the multicast group.
OutMcastPkts IPv6 multicast packets sent by the interface.
InAddrErrors
Received IPv6 packets that are discarded due to invalid destination
addresses.
InDiscards
Received IPv6 packets that are discarded due to resource problems
rather than packet errors.
OutDiscards
IPv6 packets that fail to be sent due to resource problems rather than
packet errors.
# Display brief IPv6 information about all interfaces.
<Sysname> display ipv6 interface brief
*down: administratively down
(s): spoofing
Interface Physical Protocol IPv6 Address
Vlan-interface1 down down Unassigned
Vlan-interface2 up up 2001::1
Vlan-interface100 up up Unassigned
Table 45 Command output
Field Description
*down: administratively down
The interface has been administratively shut down by using the
shutdown
command.
(s): spoofing
Spoofing attribute of the interface. The link protocol state of the interface is
up, but the link is temporarily established on demand or does not exist.
Interface Name of the interface.
Physical
Physical state of the interface:
• *down—The interface has been administratively shut down by using
the shutdown command.
• down—The interface is administratively up but its physical state is
down, possibly because of a connection or link failure.
• up—The administrative and physical states of the interface are both
up.

Table of Contents

Other manuals for HPE FlexFabric 5950 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexFabric 5950 Series and is the answer not in the manual?

HPE FlexFabric 5950 Series Specifications

General IconGeneral
BrandHPE
ModelFlexFabric 5950 Series
CategorySwitch
LanguageEnglish

Related product manuals