HPE FlexFabric 5950 Series

276
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command
displays DHCPv6 server statistics for the public network.
Examples
# Display all DHCPv6 packet statistics on the DHCPv6 server.
<Sysname> display ipv6 dhcp server statistics
Bindings:
Ip-in-use : 1
Pd-in-use : 0
Expired : 0
Conflict : 0
Packets received : 1
Solicit : 1
Request : 0
Confirm : 0
Renew : 0
Rebind : 0
Release : 0
Decline : 0
Information-request : 0
Relay-forward : 0
Packets dropped : 0
Packets sent : 0
Advertise : 0
Reconfigure : 0
Reply : 0
Relay-reply : 0
Table 66 Command output
Field Description
Bindings
Number of bindings:
• Ip-in-use—Total number of address bindings.
• Pd-in-use—Total number of prefix bindings.
• Expired—Total number of expired address bindings.
Conflict
Total number of conflicted addresses. If statistics about an address pool are
displayed, this field is not displayed.
Packets received
Number of messages received by the DHCPv6 server. The message types
include:
• Solicit.
• Request.
• Confirm.
• Renew.
• Rebind.
• Release.
• Decline.
• Information-request.
• Relay-forward.
If statistics about an address pool are displayed, this field is not displayed.