54
Syntax
display dhcp server free-ip [ pool pool-name | vpn-instance vpn-instance-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pool pool-name: Displays assignable IP addresses in the specified address pool. The pool name is a
case-insensitive string of 1 to 63 characters. If you do not specify an address pool, this command
displays all assignable IP addresses for all address pools.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command
displays assignable IP addresses in address pools for the public network.
Examples
# Display assignable IP addresses in all address pools.
<Sysname> display dhcp server free-ip
Pool name: 1
Network: 10.0.0.0 mask 255.0.0.0
IP ranges from 10.0.0.10 to 10.0.0.100
IP ranges from 10.0.0.105 to 10.0.0.255
Secondary networks:
10.1.0.0 mask 255.255.0.0
IP ranges from 10.1.0.0 to 10.1.0.255
10.2.0.0 mask 255.255.0.0
IP Ranges from 10.2.0.0 to 10.2.0.255
Pool name: 2
Network: 20.1.1.0 mask 255.255.255.0
IP ranges from 20.1.1.0 to 20.1.1.255
Table 8 Command output
Field Description
Pool name Name of the address pool.
Network Assignable network.
IP ranges Assignable IP address range.
Secondary networks Assignable secondary networks.
Related commands
address range
dhcp server ip-pool
network
To Next Page
Loading...
