HPE FlexNetwork 5130 HI SERIES User Manual

170
Views
System view
Predefined user roles
network-admin
Parameters
plain-password: Specifies a key in plaintext form. The plain-password argument is a case-sensitive
string of 1 to 64 characters.
mode: Specifies an authentication algorithm and encryption algorithm. The device supports the
HMAC-MD5 and HMAC-SHA1 authentication algorithms. The HMAC-MD5 algorithm is faster than
the HMAC-SHA1 algorithm. The HMAC-SHA1 algorithm provides more security than the
HMAC-MD5 algorithm. The AES256, AES192, AES, 3DES, and DES encryption algorithms (in
descending order of security strength) are available for the device. A more secure algorithm
calculates slower. DES is enough to meet general security requirements.
• 3desmd5: Calculates the encrypted form for the encryption key by using the 3DES encryption
algorithm and HMAC-MD5 authentication algorithm.
• 3dessha: Calculates the encrypted form for the encryption key by using the 3DES encryption
algorithm and HMAC-SHA1 authentication algorithm.
• aes192md5: Calculates the encrypted form for the encryption key by using the AES192
encryption algorithm and the HMAC-MD5 authentication algorithm.
• aes192sha: Calculates the encrypted form for the encryption key by using the AES192
encryption algorithm and the HMAC-SHA1 authentication algorithm.
• aes256md5: Calculates the encrypted form for the encryption key by using the AES256
encryption algorithm and the HMAC-MD5 authentication algorithm.
• aes256 sha: Calculates the encrypted form for the encryption key by using the AES256
encryption algorithm and the HMAC-SHA1 authentication algorithm.
• md5: Calculates the encrypted form for the authentication key or encryption key by using the
HMAC-MD5 authentication algorithm and AES or DES encryption algorithm. When the
HMAC-MD5 authentication algorithm is used, you can get the same authentication key or
encryption key in encrypted form regardless of whether the AES or DES encryption algorithm is
used.
• sha: Calculates the encrypted form for the authentication key or encryption key by using
HMAC-SHA1 authentication algorithm and AES or DES encryption algorithm. When the
HMAC-SHA1 authentication algorithm is used, you can get the same authentication key or
encryption key in encrypted form regardless of whether the AES or DES encryption algorithm is
used.
local-engineid: Uses the local engine ID to calculate the encrypted form for the key. You can
configure the local engine ID by using the snmp-agent local-engineid command.
specified-engineid engineid: Uses a user-defined engine ID to calculate the encrypted form for the
key. The engineid argument is an even number of case-insensitive hexadecimal characters. All-zero
and all-F strings are invalid. The even number is in the range of 10 to 64.
Usage guidelines
Make sure the SNMP agent is enabled before you execute the snmp-agent calculate-password
command.
For security purposes, use the encrypted-form key generated by using this command when you
create SNMPv3 users by specifying the cipher keyword in the snmp-agent usm-user v3
command.
The encrypted form of the key is valid only under the engine ID specified for key conversion.

HPE FlexNetwork 5130 HI SERIES Specifications

General

Brand	HPE
Model	FlexNetwork 5130 HI SERIES
Category	Switch
Language	English