203
network-operator
Parameters
entry-number: Specifies an alarm entry index in the range of 1 to 65535. If you do not specify an entry,
the command displays all private alarm entries.
Examples
# Display information about all RMON private alarm entries.
<Sysname> display rmon prialarm
PrialarmEntry 1 owned by user1 is VALID.
Sample type : absolute
Variable formula : (.1.3.6.1.2.1.16.1.1.1.6.1*100/.1.3.6.1.2.1.16.1.1.1.5.1)
Description : ifUtilization.GigabitEthernet1/0/1
Sampling interval (in seconds) : 10
Rising threshold : 80(associated with event 1)
Falling threshold : 5(associated with event 2)
Alarm sent upon entry startup : risingOrFallingAlarm
Entry lifetime : forever
Latest value : 85
Table 48 Command output
Field Description
PrialarmEntry entry-number
owned by owner is status.
Alarm entry owner and status:
• entry-number—Alarm entry index.
• owner—Entry owner.
• status—Entry status:
{ VALID—The entry is valid.
{ UNDERCREATION—The entry is invalid.
The status field is not configurable at the CLI. All alarm entries created from
the CLI are valid by default.
The
display rmon prialarm
command can display invalid entries, but the
display current-configuration
and
display this
commands do not display
their settings.
Sample type
Sample type:
• absolute.
• delta.
Variable formula Variable formula.
Description Description of the alarm.
Sampling interval Interval (in seconds) at which data is sampled.
Rising threshold Alarm rising threshold.
Falling threshold Alarm falling threshold.
associated with event Event index associated with the alarm..
Alarm sent upon entry
startup
Alarm that can be generated at the first sampling:
• risingAlarm.
• fallingAlarm.
• risingOrFallingAlarm.
The default is
risingOrFallingAlarm
.
To Next Page
Loading...
