155
Syntax
sftp server [ port-number ] [ vpn-instance vpn-instance-name ] suite-b [ 128-bit | 192-bit ]
pki-domain domain-name [ server-pki-domain domain-name ] [ prefer-compress zlib ] [ dscp
dscp-value | source { interface interface-type interface-number | ip ip-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
server: Specifies a server by its IPv4 address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies the port number of the server, in the range of 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the server belongs.
The vpn-instance-name argument represents the VPN instance name, a case-sensitive string of 1 to
31 characters.
suite-b: Specifies the Suite B algorithms. If neither the 128-bit keyword nor the 192-bit keyword is
specified, all algorithms in Suite B are used. For more information about the Suite B algorithms, see
Table 6.
128-bit: Specifies the 128-bit Suite B security level.
192-bit: Specifies the 192-bit Suite B security level.
pki-domain domain-name: Specifies the PKI domain of the client's certificate. The domain-name
argument represents the PKI domain name, a case-insensitive string of 1 to 31 characters, excluding
the characters listed in Table 9.
Table 9 Invalid characters for a PKI domain name
Tilde ~ Dot .
Asterisk * Left angle bracket <
Backslash \ Right angle bracket >
Vertical bar | Quotation marks "
Colon : Apostrophe '
server-pki-domain domain-name: Specifies the PKI domain for verifying the server's certificate.
The domain-name argument represents the PKI domain name, a case-insensitive string of 1 to 31
characters, excluding the characters listed in Table 9.
prefer-compress: Specifies the preferred compression algorithm for data compression between the
server and the client. By default, compression is not supported.
zlib: Specifies the compression algorithm zlib.
To Next Page
Loading...
Need help?
General
