Huawei OceanStor S2600 - Hibernation Management Commands; Chgcomsleep

Parameters
Keyword and Value Description Default Value
-m model The mode of the controller.
The value is 0 or 1:
l 0: The mode of the
controller is double
controllers fault mode.
l 1: The mode of the
controller is single
controller normal mode. (1
is recommended.)
None.
Modes
Normal mode.
Level
Administrator level.
Usage Guidelines
None.
Example
Set the mode of the controller is single controller normal mode.
OceanStor: admin> chgctrlmodel -m 1
5.4 Hibernation Management Commands
Hibernation management commands are used to manage the hibernation of the components.
5.4.1 chgcomsleep
5.4.2 showcomsleep
5.4.1 chgcomsleep
Function
The command chgcomsleep is used to allow or prohibit hibernation of a component.
Format
chgcomsleep -o operate type -i component id -t component type [ -id idle time ]
OceanStor S2600 Storage System
Command Reference 5 Device Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-9