Huawei OceanStor S2600 - Chgini

Function
The command deletetgtinfo is used to delete configurations of the initiator added to a target
(controller).
Format
deletetgtinfo -c controller ID -ti target ID
Parameters
Keyword and Value Description Default Value
-c controller ID
The controller ID. The value is A or B, and it is case
insensitive.
None.
-ti target ID
The target ID. The value ranges from 0 to 7.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
None.
Example
Delete configurations of the target on controller A.
OceanStor: admin> deletetgtinfo -c a -ti 0
System Response
When the command is complete, you can run the showtgt command to view the result.
9.4.9 chgini
Function
The command chgini is used to switchover the initiator of a target (controller).
Format
chgini -c controller ID -ti target ID
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-58 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)