Huawei OceanStor S2600 - Command of Clearing the DB Configuration of the Coffer

Parameters
Keyword and Value Description Default Value
-i index The index of the Trap IP to be
deleted
The value ranges from 0 to
3, which can be obtained
through the command
showtrapip.
None.
-p port ID The port ID of the Trap IP
The value ranges from 1 to
65535.
None.
-a IP address The address of the Trap IP. None.
-v version The version number of the
Trap IP
The value can be 1 or 2.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
When using the command chgtrapip, the parameter -i is indispensable, and at least one
parameter of -p, -a and -v must be entered.
Example
Modify the port ID of the Trap IP whose index is 1 to 210.
OceanStor: admin> chgtrapip -i 1 -p 210
4.12 Command of Clearing the DB Configuration of the
Coffer
Command of clearing the DB configuration of the coffer is used to clear the DB configuration
of the coffer.
4.12.1 cleancofferdb
OceanStor S2600 Storage System
Command Reference 4 System Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-41