Huawei OceanStor S2600 - Replacing a Power Module

l The command showsesversion is used to query the SES versions about all controllers and
expander modules.
l The command showsesversion -s subrack ID -i board ID is used to query the SES version
about a specified controller or expander module of a specified enclosure.
Example
Query the SES versions about all controllers and expander modules.
OceanStor: admin> showsesversion
Subrack ID Board ID Version
0 0 S008
0 1 S008
4.6.5 upgradeses
Function
The command upgradeses is used to upgrade the SES firmware software.
Format
upgradeses -i host IP address -u user name -p password -f file
Parameters
Keyword and Value
Description Default Value
-i host IP address The IP address of the FTP
Server. It is requested that the
FTP Server can access the
storage network system.
None.
-u user name The user name of the FTP
server.
None.
-p password The password of the FTP
server.
None.
-f file The path of the SES package
that is stored on the FTP
Server, and the file name.
None.
Modes
Normal mode, safe mode, and upgrade mode.
Level
Super administrator level and administrator level.
4 System Management Commands
OceanStor S2600 Storage System
Command Reference
4-28 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)