Huawei OceanStor S2600 - Startcopyback

Example
Reconstruct the failed disk in slot 1, enclosure 0 to the hot spare disk in slot 2, enclosure 1 without
confirmation.
OceanStor: admin> startrecon -fs 0 -fsl 1 -ss 1 -ssl 2 -f
6.4.2 startcopyback
Function
The command startcopyback is used to enable the copyback function for a disk.
Format
startcopyback [ -f ] -ns new disk subrack ID -nsl new disk slot ID
Parameters
Keyword and Value Description Default Value
-f When you enable the
copyback function for a disk,
you do not need to enter the
confirmation information.
None.
-ns new disk subrack ID The enclosure ID of a new
disk. The value ranges from 0
to 7.
None.
-nsl new disk slot ID The slot ID of a new disk. The
value ranges from 0 to 11.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
The command startcopyback is used to enable the copyback function for a hard disk.
Example
Copyback the data from the spare disk to the new disk that is in slot 11, enclosure 1 without
confirmation.
OceanStor: admin> startcopyback -f -ns 1 -nsl 11
OceanStor S2600 Storage System
Command Reference 6 Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-33