Huawei OceanStor S2600 - Hypercopy Configuration Commands

Parameters
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
None.
Example
Query qualified LUNs in the system for the source LUN of a timing HyperImage.
OceanStor: admin> showlunfortimehyimg
LUN Name LUN ID Capacity(MB) RAID Group RAID Level
LUN01 0 100 RAID01 RAID0
LUN02 1 100 RAID01 RAID0
LUN03 2 100 RAID01 RAID0
h1 3 1000 RAID01 RAID0
f3 6 15 RAID01 RAID0
f6 9 10 RAID01 RAID0
J1 14 1000 RAID01 RAID0
J2 15 1000 RAID01 RAID0
test 16 100 RAID01 RAID0
e1 23 98 RAID01 RAID0
System Response
None.
9.2 Hypercopy Configuration Commands
Hypercopy configuration commands are used to create, delete, modify, query Hypercopy
information and label Hypercopy.
9.2.1 showhycpinfo
9.2.2 showhycpluninfo
9.2.3 chghycpinfo
9.2.4 deletehycplun
9.2.5 deletehycp
9.2.6 chghycpstatus
9.2.7 showlunforhycp
9.2.8 createhycp
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-28 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)