Huawei OceanStor S2600 - Alarm Email Management Commands; Chgemail

7.1 Alarm Email Management Commands
Alarm email management commands are used to manage alarm emails.
7.1.1 chgemail
7.1.2 showemail
7.1.1 chgemail
Function
The command chgemail is used to set email boxes.
Format
chgemail -s is need send [ -i server ip -r receive email list -e sender email [ -c is need check [ -
u user name -p passwd ] ] [ -l send level ] ]
Parameters
Keyword and Value
Description Default Value
-s is need send The parameter indicates
whether an email needs be
sent. The value can be 0 or 1
and is described as follows:
l 0: The email does not need
to be sent.
l 1: The email need to be
sent.
1.
-i server IP The IP address of an SMTP
email server.
None.
-r receiver list The email box list of email
boxes that receive alarms.
The lists are separated with
colons.
None.
-e sender email The email box of an alarm
sender.
None.
7 Alarm Management Commands
OceanStor S2600 Storage System
Command Reference
7-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)