Huawei OceanStor S2600 - Showarraylinkinfo

Parameters
Keyword and Value Description Default Value
-t link type
The link type. The value can be 0 or 1：
l 0 stands for local link.
l 1 stands for a third- part link.
None.
-i link ID
The link ID. The value ranges from 0 to 255.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
l The showlinkinfo -t link type command queries information on all links, including the link
ID, arrays ID, link type, connect status and whether be used.
l The showlinkinfo -t link type -i link ID queries information on a specified link, including
the array ID, link type, local controller, local port, remote controller, remote port, connect
status, whether be used or is a mirrored link, FC local WWPN, FC remote WWPN and
remote WWN.
Example
Query information of local link with ID 4 in the system.
OceanStor: admin> showlinkinfo -t 0 -i 4
================================
Link Information
--------------------------------
Link ID | 4
Array ID | 0
Link Type | iSCSI
Local Controller | B
Local Port | 3
Remote Controller | B
Remote Port | 3
Connect Status | Connect
Whether Be Used | No
Is Mirror Link | No
================================
System Response
None.
9.5.2 showarraylinkinfo
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-60 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)