4.8 System Reset Command
System reset command is used to reset the system.
4.8.1 resetsys
4.8.1 resetsys
Function
The command resetsys is used to reset the system.
Format
resetsys [ -f ]
Parameters
Keyword and Value Description Default Value
-f The system is reset in
mandatory mode.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
When using this command, note the following items:
l The command resetsys is used to reset the system in general mode.
l The command resetsys -f is used to reset the system in mandatory mode.
Example
Reset the system.
OceanStor: admin> resetsys
the system will be reset and restarted, which will cause temporary service
interruption!
do you want to continue? y or n: y
the system is going to be reset, please wait...
OceanStor S2600 Storage System
Command Reference 4 System Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-31
To Next Page
Loading...
