Huawei OceanStor S2600 - Figure 1-6 Putty Configuration; Figure 1-7 Logging to the Server through the Putty Software

Figure 1-6 PuTTY Configuration
2. Enter the IP address of the management network port in Specify your connection by host
name or IP addressHost Name (or IP address). Select Protocol as SSH.
3. Click Open and the displayed interface is as shown in Figure 1-7.
Figure 1-7 Logging to the server through the PuTTY software
1 Introduction to the CLI
OceanStor S2600 Storage System
Command Reference
1-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)