Huawei OceanStor S2600 - Showexpboard

5.6.1 showexpboard
Function
The command showexpboard is used to query the state information about an expander module.
Format
showexpboard [ -s subrack ID [ -i board ID ] ]
Parameters
Keyword and Value Description Default Value
-s subrack ID The ID of an enclosure to
which an expander module
belongs. The value ranges
from 0 to 7.
None.
-i board ID The ID of an expander
module. The value can be 0
or 1.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l The command showexpboard is used to query the information about all expander modules.
l The command showexpboard -s subrack ID is used to query the information about all
expander modules for a specified enclosure.
l The command showexpboard -s subrack ID -i board ID is used to query the information
about an expander module in a specified enclosure and board.
Example
Query the information about an expander module by specifying its enclosure ID to 1 and board
ID to 1.
OceanStor: admin> showexpboard -s 1 -i 1
=========================================================================
Expander Board Infomation
-------------------------------------------------------------------------
OceanStor S2600 Storage System
Command Reference 5 Device Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-15