Huawei OceanStor S2600 - Deletehyimg

Parameters
Keyword and Value Description Default Value
-i source LUN ID
The ID of the source LUN. The value ranges from
0 to 511.
You can query the information by running the
showlunforhyimg command.
None.
-n name
The HyperImage name. The name contains 1 to 32
characters, including numbers, letters, underscores,
and hyphens. The first character cannot be a
hyphen.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
None.
Example
Create a HyperImage with the source LUN ID of 9 and name of wwwww.
OceanStor: admin> createhyimg -i 9 -n wwwww
System Response
When the command is complete, you can run the showhyimginfo command to view the result.
9.1.11 deletehyimg
Function
The command deletehyimg is used to delete a HyperImage.
Format
deletehyimg -i HyperImage ID
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-12 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)