Huawei OceanStor S2600 - Showhost

Parameters
Keyword and Value Description Default Value
-f When you delete a host, you
do not need to enter the
confirmation information.
None.
-i host ID The ID of the host to be
deleted. The value ranges
from 0 to 255.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
When you use this command to delete a specified host, ensure that the host does not contain any
port; otherwise, you cannot delete the host.
Example
Delete host 1 without confirmation.
OceanStor: admin> deletehost -f -i 1
6.3.8 showhost
Function
The command showhost is used to query the list information about a host.
Format
showhost [ -i host group ID ]
Parameters
Keyword and Value
Description Default Value
-i host group ID The host group ID. The value
ranges from 0 to 31.
None.
6 Service Management Commands
OceanStor S2600 Storage System
Command Reference
6-22 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)