Parameters
Keyword and Value Description Default Value
-i HyperImage ID
The HyperImage ID. The value ranges from 0 to
127.
You can query the information by running the
showhyimginfo command.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
Deleting a HyperImage which is in the active state or rollback state is forbidden.
Example
Delete the HyperImage with the ID of 19.
OceanStor: admin> deletehyimg -i 19
System Response
When the command is complete, you can run the showhyimginfo command to view the result.
9.1.12 disablehyimg
Function
The command disablehyimg is used to stop a HyperImage.
Format
disablehyimg -i HyperImage ID
OceanStor S2600 Storage System
Command Reference 9 Value-Added Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-13
To Next Page
Loading...
