Huawei OceanStor S2600 - Chgsms

7.2.1 chgsms
7.2.2 showsms
7.2.1 chgsms
Function
The command chgsms is used to set short message.
Format
chgsms -s is need send [ -c send country -r receiver number [ -l sender level ] ]
Parameters
Keyword and Value Description Default Value
-s is need send Whether a short message
needs to be sent. The value
can be 0 or 1 and is described
as follows:
l 0: The short message does
not need to be sent.
l 1: The short message
needs to be sent.
1.
-c send country The code of the country to
which a short message is sent.
None.
-r receiver number The short message number of
a receiver, namely, the short
message number of a
maintenance person.
You can input multiple
receiver numbers, the total
length is less than 255.
None.
-l sender level The lowest alarm severity for
sending an alarm email.
The value ranges from 3 to 6
and is described as follows:
l 3: Warning.
l 4: Minor.
l 5: Major.
l 6: Critical.
3.
OceanStor S2600 Storage System
Command Reference 7 Alarm Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7-5