Huawei OceanStor S2600 - Deletehycp; Chghycpstatus

OceanStor: admin> deletehycplun -i 0 -ti 0
System Response
When the command is complete, you can run the showhycpluninfo command to view the result.
9.2.5 deletehycp
Function
The command deletehycp is used to delete a HyperCopy.
Format
deletehycp -i HyperCopy ID
Parameters
Keyword and Value Description Default Value
-i HyperCopy ID
The HyperCopy ID. The value ranges from 0 to 63.
You can query the information by running the
showhycpinfo command.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
When the HyperCopy is in copying mode or waiting mode, deletion is forbidden.
Example
Delete the HyperCopy with the ID 0.
OceanStor: admin> deletehycp -i 0
The command has been sent, please wait...
System Response
When the command is complete, you can run the showhycpinfo command to view the result.
9.2.6 chghycpstatus
OceanStor S2600 Storage System
Command Reference 9 Value-Added Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-35