Huawei OceanStor S2600 - Software Upgrade Commands; Upgradesys

Level
Super administrator level and administrator level.
Usage Guidelines
When using this command, note the following items:
l The command cleanerr is used to clear the error codes of all the FC host ports.
l The command cleanerr -c controller ID is used to clear the error codes of the FC host ports
on a specified controller.
NOTE
This command is only applicable to FC host interfaces in the storage system.
Example
Clear the error codes of FC host ports on controller A.
OceanStor: admin> cleanerr -c a
4.6 Software Upgrade Commands
Software upgrade commands are used to upgrade the system software and SCSI Enclosure
Services (SES) Fiemware version.
4.6.1 upgradesys
4.6.2 synchronize
4.6.3 showsesmac
4.6.4 showsesversion
4.6.5 upgradeses
4.6.1 upgradesys
Function
The command upgradesys is used to upgrade the system software.
Format
upgradesys -i host IP address -u user name -p password -f file [ -force ]
4 System Management Commands
OceanStor S2600 Storage System
Command Reference
4-24 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)