Huawei OceanStor S2600 - Showpoollun

Parameters
Keyword and Value Description Default Value
-i LUN ID
The LUN ID. The value ranges from 0 to 511.
You can query the information by running the
showpoollun -pi pool ID command.
None.
-pi pool ID
The resource pool ID. The value is A or B, and it is
case insensitive.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
None.
Example
Remove the resource LUN with the ID of 8 from resource pool A.
OceanStor: admin> rmlunfrompool -i 8 -pi a
System Response
None.
9.1.6 showpoollun
Function
The command showpoollun is used to query information of resource LUNs in a resource pool.
Format
showpoollun -pi pool ID [-i LUN ID]
OceanStor S2600 Storage System
Command Reference 9 Value-Added Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-7