Huawei OceanStor S2600 - Disk Enclosure Configuration Commands; Showsubrack

5.1 Disk Enclosure Configuration Commands
Disk enclosure configuration commands are used to query the disk enclosure information ,
change the disk enclosure ID, and delete the disk enclosure.
5.1.1 showsubrack
5.1.2 deletesubrack
5.1.1 showsubrack
Function
The command showsubrack is used to query the disk enclosure information.
Format
showsubrack [ -s subrack ID ]
Parameters
Keyword and Value
Description Default Value
-s subrack ID The ID of a disk enclosure.
The value ranges from 0 to 7.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l The command showsubrack is used to query the information about all enclosures of the
system.
l The command showsubrack -s subrack ID is used to query the information about a
specified enclosure.
Example
Query the information about all enclosures.
OceanStor: admin> showsubrack
OceanStor S2600 Storage System
Command Reference 5 Device Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-3