Huawei OceanStor S2600 - Chglun

Function
The command deletelun is used to delete a LUN.
Format
deletelun [ -f ] -i LUN ID
Parameters
Keyword and Value Description Default Value
-f When you delete a LUN, you
do not need to enter the
confirmation information.
None.
-i LUN ID The LUN ID. The value
ranges from 0 to 511.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
The command deletelun is used to delete a LUN.
Example
Delete LUN 9 without confirmation.
OceanStor: admin> deletelun -f -i 9
6.2.3 chglun
Function
The command chglun is used to change the parameters of a LUN.
Format
chglun -i LUN ID -n name | -c controller ID | -w is write through | -m is mirror | -p
prefetchtype [-v prefetch value]
OceanStor S2600 Storage System
Command Reference 6 Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-11