Huawei OceanStor S2600 - Showfcport

Keyword and Value Description Default Value
-m mode The topology of an FC port.
The value ranges from 1 to 3.
l 1: Fabric.
l 2: Loop.
l 3: Point to Point.
None.
Modes
Normal mode.
Level
administrator level.
Usage Guidelines
None.
Example
On controller A, change the topology of the current FC port 1 to 2 Gbit/s.
OceanStor: admin> chgfcmode -c a -i 1 -m 1
This operation will lead to interrupt the service!
Do you want to continue? y/Y or n/N: y
5.13.11 showfcport
Function
showfcport is used to query the detail information of all FC host ports exist in the system.
Format
showfcport
Parameters
None.
Modes
Normal mode.
Level
Guest level and administrator level.
5 Device Management Commands
OceanStor S2600 Storage System
Command Reference
5-36 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)