Huawei OceanStor S2600 - Chgrgredundantcopy

Parameters
Keyword and Value Description Default Value
-i RAID group ID The RAID group ID. The
value ranges from 0 to 31.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l The command showrg is used to query the information about all RAID groups in the
system.
l The command showrg -i RAID group ID is used to query the details about a specified RAID
group.
Example
Query the information about RAID group 0 .
OceanStor: admin> showrg -i 0
=====================================
RAID Group Information
-------------------------------------
ID | 0
Name | RAID001
Level | RAID0
Total Capacity(MB) | 1400087
Free Capacity(MB) | 1377557
Status | Normal
Member disk list | 0,0;0,1;
Maximum Capacity(MB) | 1377557
=====================================
6.1.5 chgrgredundantcopy
Function
The command chgrgredundantcopy is used to set the redundant copy status of a RAID group.
Format
chgrgredundantcopy -t type
6 Service Management Commands
OceanStor S2600 Storage System
Command Reference
6-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)