9.2.9 taghycp
9.2.10 addhycplun
9.2.1 showhycpinfo
Function
The command showhycpinfo is used to query the HyperCopy information.
Format
showhycpinfo [-i HyperCopy ID]
Parameters
Keyword and Value Description Default Value
-i HyperCopy ID
The HyperCopy ID. The value ranges from 0 to 63.
You can query the information by running the
showhycpinfo command.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
l The showhycpinfo command queries basic information of all HyperCopies. The
information includes the name, ID, type, state, and status of the HyperCopies.
l The showhycpinfo -i HyperCopy ID command queries detailed information of a specific
HyperCopy. The information includes the HyperCopy ID, HyperCopy name, source LUN
ID, source LUN name, source LUN array name, source LUN array WWN, source LUN
type, source LUN status, source LUN capacity, HyperCopy user, HyperCopy speed,
HyperCopy pair state, HyperCopy status, mark state, marking time, start time, and end time.
Considering a full HyperCopy, if the source LUN is an external LUN, the information
(including link ID, link status, link type, and external array WWN) of the external array
that the source LUN belongs to is displayed.
Example
Query detailed information of the HyperCopy with the ID of 2.
OceanStor: admin> showhycpinfo -i 2
==============================================
OceanStor S2600 Storage System
Command Reference 9 Value-Added Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-29
To Next Page
Loading...
