Huawei OceanStor S2600 - Cancelvirlunmask

Parameters
Keyword and Value Description Default Value
-i host or hostgroup ID
The host ID or host group ID. The value ranges as
follows:
l The value of the host ID ranges from 0 to 31.
You can query the information by running the
showhostgroup command.
l If it is the host ID, the value ranges from 0 to 255.
You can query the information by running the
showhost command.
None.
-t virtual lunmask type
The virtual LUN mask type. The value can be 1 or
2.
l The value 1 stands for the host, that is, the virtual
LUN mask of the host.
l The value 2 stands for the host group, that is, the
virtual LUN mask of the host group.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
None.
Example
Create a lunmasking on the host group with the ID of 2.
OceanStor: admin> createvirlunmask -i 2 -t 2
System Response
When the command is complete, you can run the showmap command to view the result.
9.6.3 cancelvirlunmask
Function
The command cancelvirlunmask is used to cancel a virtual lunmasking.
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-64 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)