Function
The command chghyimgname is used to change the HyperImage name.
Format
chghyimgname -i HyperImage ID -n name
Parameters
Keyword and Value Description Default Value
-i HyperImage ID
The HyperImage ID. The value ranges from 0 to
127.
You can query the information by running the
showhyimginfo command.
None.
-n name
The HyperImage name. The name contains 1 to 32
characters, including numbers, letters, underscores,
and hyphens. The first character cannot be a
hyphen.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
None.
Example
Change the name of the HyperImage with ID of 19 to 456456.
OceanStor: admin> chghyimgname -i 19 -n 456456
System Response
When the command is complete, you can run the showhyimginfo command to view the result.
9.1.3 showlunforpool
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-4 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)
To Next Page
Loading...
