System Response
If the target LUN is in an external array that belongs to another S2600 device, the link type, link
ID, and link status of the target LUN can be displayed.
9.2.3 chghycpinfo
Function
The command chghycpinfo is used to change properties of the HyperCopy.
Format
chghycpinfo -i HyperCopy ID {[-n the HyperCopy name] [-s the HyperCopy speed] [-t the
HyperCopy type [-is initially synchronize]]}
Parameters
Keyword and Value Description Default Value
-i HyperCopy ID
The HyperCopy ID. The value ranges from 0 to
63.
You can query the information by running the
showhycpinfo command.
None.
-n the HyperCopy name
The HyperCopy name. The name contains 1 to 32
characters, including numbers, letters,
underscores, and hyphens. The first character
cannot be a hyphen.
None.
-s the HyperCopy speed
The HyperCopy speed. The value ranges from 1
to 4.
l 1 stands for low.
l 2 stands for middle.
l 3 stands for high.
l 4 stands for ASAP.
NOTE
ASAP is short for As Soon As Possible.
None.
-t the HyperCopy type
The HyperCopy type. The value can be 1 or 2.
l The value 1 stands for full copy.
l The value 2 stands for increment copy.
None.
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-32 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)
To Next Page
Loading...
