Huawei OceanStor S2600 - Showupsstat

Usage Guidelines
The command showupstime is used to query the system time of a UPS.
Example
Query the system time of UPS 1.
OceanStor: admin> showupstime -i 1
Ups 1 System Time: 20090205193459
5.7.2 showupsstat
Function
The command showupsstat is used to query the information about all the states of a UPS.
Format
showupsstat [ -i ups id ]
Parameters
Keyword and Value
Description Default Value
-i ups id The UPS ID. The value can
be 0 or 1.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
The command showupsstat is used to query the information about all the states of a UPS.
Example
Query the information about all the states of a UPS.
OceanStor: admin> showupsstat
================================================
Ups Id 1 Information
------------------------------------------------
Heathy Status | Normal
Operate Status | OnLine
Enough Time To Write | yes
Discharge Status | No Discharge
Charge Status | Not Average Charge
OceanStor S2600 Storage System
Command Reference 5 Device Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-17