Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l The command showhost is used to query the list information about all hosts.
l The command showhost -i host group ID is used to query the list information about the
hosts in a specified host group.
Example
Query the information about all hosts.
OceanStor: admin> showhost
Host ID Host Group ID Host Name
0 1 Host_35
1 1 Host_24
2 0 wang
6.3.9 showfreeport
Function
The command showfreeport is used to query the information about all free host ports.
Format
showfreeport
Parameters
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
The command showfreeport is used to query the information about all free host ports.
OceanStor S2600 Storage System
Command Reference 6 Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-23
To Next Page
Loading...
