6.4.3 showdisk
Function
The command showdisk is used to query the details about a disk.
Format
showdisk -p | -l | -s subrack ID -sl slot ID | -h
Parameters
Keyword and Value Description Default Value
-p The physical disk. None.
-l The logical disk. None.
-s subrack ID The enclosure ID of a disk.
The value ranges from 0 to 7.
None.
-sl slot ID The slot ID of a disk. The
value ranges from 0 to 11.
None.
-h The hot spare disk. None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l The command showdisk -p is used to query the information about a physical disk.
l The command showdisk -l is used to query the information about a logical disk.
l The command showdisk -s subrack ID -sl slot ID is used to query the details about a disk
in a specified disk enclosure and slot.
l The command showdisk -h is used to query the information about a hot spare disk.
Example
Query the details about a hard disk in enclosure 0, slot 4.
OceanStor: admin> showdisk -s 0 -sl 4
==============================================
6 Service Management Commands
OceanStor S2600 Storage System
Command Reference
6-34 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)
To Next Page
Loading...
