Huawei OceanStor S2600 - BBU Information Query Command; Showbbu

OceanStor: admin> shutdown
The system will power off, which will cause service interruption!
Do you want to continue? y/Y or n/N : n
5.10 BBU Information Query Command
BBU information query command is used to query the information about BBU.
5.10.1 showbbu
5.10.1 showbbu
Function
The command showbbu is used to query the information about the backup battery unit (BBU).
Format
showbbu [-i bbu id]
Parameters
Keyword and Value
Description Default Value
-i bbu id The ID of the BBU to be
queried.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l Enter showbbu to query all information about the BBU, such as the ID, present status,
BBU status, and if it is fully charged.
l Enter showbbu -i bbu id to query the information about a designated BBU, including the
present status and if it is fully charged.
Example
Query the all information about the BBU.
OceanStor: admin> showbbu
================================================
5 Device Management Commands
OceanStor S2600 Storage System
Command Reference
5-20 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)