Classification Command
showunmap
addmap
showmap
deletemap
Disk configuration commands startrecon
startcopyback
showdisk
chgdisktype
Cache configuration commands showcache
chgcache
a: Redundant Array of Independent Disks
b: Logical Unit Number
2.2.5 Alarm Management Commands
The alarm management commands are mainly used to configure and query the alarm information
of the storage system.
Table 2-6 lists the alarm management commands.
Table 2-6 Alarm management command set
Classification
Command
Alarm email management commands chgemail
showemail
Alarm short message management commands chgsms
showsms
2.2.6 User Management Commands
The user management commands are mainly used to configure and query the user information
of the storage system.
Table 2-7 lists the user management commands.
OceanStor S2600 Storage System
Command Reference 2 Introduction to the CLI Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-9
To Next Page
Loading...
