Huawei OceanStor S2600 - Showctrlboard

5.3.1 showctrlboard
Function
The command showctrlboard is used to query the state information about a controller.
Format
showctrlboard [ -c controller ID ]
Parameters
Keyword and Value Description Default Value
-c controller ID The controller ID. The value
is A or B, and is case
insensitive.
None.
Modes
Normal mode.
Level
Super administrator level, administrator level and guest level.
Usage Guidelines
When using this command, note the following items:
l The command showctrlboard is used to query the state information about all controllers.
l The command showctrlboard -c controller ID is used to query the state information about
a specified controller.
Example
Query the state information about all controllers.
OceanStor: admin> showctrlboard
=========================================================================
Controller Board Information
-------------------------------------------------------------------------
Controller Board ID | A
Type | SAS Controller Board
Status | On
Primary Port | Not Connected
UPS Serial Port | Not Connected
Management Serial Port | Not Connected
Network Port | Connected
Heartbeat Port | Connected
Logic Version | 230T02
PCB Version | STE1SCUA VER.C
BIOS Version | T02
OceanStor S2600 Storage System
Command Reference 5 Device Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-7