Huawei OceanStor S2600 - Common Methods for Fault Location; Alarm Analyzing Method

2.2.4 Service Management Commands
The service configuration commands are mainly used to configure and query the service
information of the storage system.
Table 2-5 lists the service configuration commands.
Table 2-5 Service configuration command set
Classification Command
RAID
a
group configuration commands
createrg
deleterg
chgrg
showrg
chgrgredundantcopy
showrgredundantcopy
LUN
b
configuration commands
createlun
deletelun
chglun
showlun
LUN mapping configuration commands createhostgroup
deletehostgroup
chghostgroup
showhostgroup
addhost
chghost
deletehost
showhost
showfreeport
addport
showhostport
deleteport
chgport
2 Introduction to the CLI Commands
OceanStor S2600 Storage System
Command Reference
2-8 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)