Parameters
Keyword and Value Description Default Value
-i LUN ID
The LUN ID to be added. The value ranges from 0
to 511.
You can query the information by running the
showlunforpool command.
None.
-pi pool ID
The resource pool ID. The value is A or B, and it is
case insensitive.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
None.
Example
Add a resource LUN to pool A. The ID of the LUN is 8.
OceanStor: admin> addluntopool -i 8 -pi a
System Response
None.
9.1.5 rmlunfrompool
Function
The command rmlunfrompool is used to remove a resource LUN from the resource pool.
Format
rmlunfrompool -i LUN ID -pi pool ID
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)
To Next Page
Loading...
