Huawei OceanStor S2600 - 6 Service Management Commands

6 Service Management Commands
About This Chapter
Service management commands are used to configure and query the service information of the
storage system.
6.1 RAID Group Configuration Commands
RAID group configuration commands are used to create or delete RAID groups, change the
names, and query the information of RAID groups.
6.2 LUN Configuration Commands
LUN configuration commands are used to create, delete, change, format, and query the
information about a LUN.
6.3 LUN Mapping Configuration Commands
LUN mapping configuration commands are used to manage the hostgroups, hosts, host ports,
and mappings of LUNs.
6.4 Disk Configuration Commands
Disk configuration commands are used to enable the disk reconstruction function and the disk
copyback function, query the details and set the type for a disk.
6.5 Cache Configuration Commands
Cache configuration commands are used to set the cache water level and query the details about
the cache.
OceanStor S2600 Storage System
Command Reference 6 Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-1