Huawei OceanStor S2600 - Figure 1-1 Connection Description; Figure 1-2 Connect to

Figure 1-1 Connection Description
2. The Connect To dialog box is displayed as shown in Figure 1-2. In the Connect using
drop-down list, select a serial port, for example, COM1, and click OK.
Figure 1-2 Connect To
3. In the COM1 Properties dialog box, set the parameters as shown in Figure 1-3. Click
OK.
OceanStor S2600 Storage System
Command Reference 1 Introduction to the CLI
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1-3