Huawei OceanStor S2600 - Chgrg

Function
The command deleterg is used to delete a RAID group.
Format
deleterg [ -f ] -i RAID group ID
Parameters
Keyword and Value Description Default Value
-f When you delete a RAID
group, you do not need to
enter the confirmation
information, the system will
delete the RAID group
automatically.
None.
-i RAID group ID The RAID group ID. The
value ranges from 0 to 31.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
The command deleterg can only be used in the RAID group without a LUN.
Example
Delete RAID group 1.
OceanStor: admin> deleterg -i 1
If the RAID group is deleted, the data of the RAID group will be lost. Are you sure
you want to delete the RAID group(y/n)?y
6.1.3 chgrg
Function
The command chgrg is used to change the name of a RAID group.
Format
chgrg -i RAID group ID -n RAID group name
6 Service Management Commands
OceanStor S2600 Storage System
Command Reference
6-4 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)