Huawei OceanStor S2600 Command Reference

Usage Guidelines
None.
Example
To query the slave LUN that can be used to expand LUN in the system.
OceanStor: admin> showlunforexplun
LUN Name LUN ID Capacity(MB) RAID Group RAID Level
targetLu 12 1024 RAIDXX RAID5
System Response
None.
9.3.5 addluntoexplun
Function
The command addluntoexplun is used to add a slave LUN to the expanded LUN.
Format
addluntoexplun -i expanded LUN ID -si slave LUN ID
Parameters
Keyword and Value
Description Default Value
-i expanded LUN ID
The ID of the expanded LUN. The value ranges
from 0 to 511.
You can query the information by running the
showexpluninfo command.
None.
-si slave LUN ID
The ID of the slave LUN. The value ranges from 0
to 511.
You can query the information by running the
showlunforexplun command.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
9 Value-Added Service Management Commands
OceanStor S2600 Storage System
Command Reference
9-48 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)

Huawei OceanStor S2600 Specifications

General

Model	OceanStor S2600
Form Factor	2U
Power Supply	Redundant power supplies
Controller Count	2
Max. Number of Supported Hard Drives	24
Operating Temperature	0°C to 40°C
Supported Protocols	FC, iSCSI, CIFS, NFS
RAID Levels	0, 1, 5, 6, 10, 50
Cache Memory	Up to 8 GB
Storage System Type	Hybrid (supports both HDD and SSD)
Supported Drive Types	SAS, SATA
Host Interface	8 Gbit/s Fibre Channel, 1/10 Gbit/s iSCSI
Operating Humidity	10% to 90%