1. Run the command adduser -u name -l level to set the user name and the user level, and
then press Enter.
2. The system displays "Input the PassWord." Type the password, and then press Enter.
3. The system displays "Input the PassWord, again." Type the password again, and then press
Enter.
Example
Add a user. The user name is user1, and the user level is guest.
OceanStor: admin> adduser -u user1 -l 3
Input the password:
Input the password again:
8.2 User Deleting Command
User deleting command is used to delete user.
8.2.1 deleteuser
8.2.1 deleteuser
Function
The command deleteuser is used to delete a user.
Format
deleteuser -u name
Parameters
Keyword and Value
Description Default Value
-u name The user name. None.
Modes
Normal mode.
Level
Super administrator level.
Usage Guidelines
When using this command, note the following items:
OceanStor S2600 Storage System
Command Reference 8 User Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-3
To Next Page
Loading...
