Huawei OceanStor S2600 - Startrecon

6.4.1 startrecon
Function
The command startrecon is used to enable the disk reconstruction function.
Format
startrecon [ -f ] -fs failed disk subrack ID -fsl failed disk slot ID -ss spare disk subrack ID -
ssl spare disk slot ID
Parameters
Keyword and Value Description Default Value
-fs failed disk subrack ID The enclosure ID of a failed
disk. The value ranges from 0
to 7.
None.
-fsl fail disk slot ID The slot ID of a failed disk.
The value ranges from 0 to
11.
None.
-ss spare disk subrack ID The enclosure ID of a hot
spare disk. The value ranges
from 0 to 7.
None.
-ssl spare disk slot ID The slot ID of a hot spare
disk. The value ranges from 0
to 11.
None.
-f When you enable the hard
disk reconstruction function,
you do not need to type the
confirmation information.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
The command startrecon is used to enable the hard disk reconstruction function.
6 Service Management Commands
OceanStor S2600 Storage System
Command Reference
6-32 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 07 (2010-05-20)