Huawei OceanStor S2600 - Link Information Configuration Commands; Showlinkinfo

Parameters
Keyword and Value Description Default Value
-c controller ID
The controller ID. The value is A or B, and it is case
insensitive.
None.
-ti target ID
The target ID. The value ranges from 0 to 7.
None.
Modes
Normal mode.
Level
Super administrator level and administrator level.
Usage Guidelines
None.
Example
Switchover the initiator with the ID of 0 on controller A.
OceanStor: admin> chgini -c a -ti 0
System Response
None.
9.5 Link information Configuration Commands
Link information configuration commands are used to query and modify link information.
9.5.1 showlinkinfo
9.5.2 showarraylinkinfo
9.5.1 showlinkinfo
Function
The command showlinkinfo is used to query the link information.
Format
showlinkinfo -t link type [-i link ID]
OceanStor S2600 Storage System
Command Reference 9 Value-Added Service Management Commands
Issue 07 (2010-05-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-59